TA134 Series

Dual output sensor, acceleration/temperature, side exit connector, 500 mV/g, 10 mV/°C
TA134-1D
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
Stock Product
TA134-2D
CB105 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
Built To Order
TA134-3D
CB218 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number TA134
Sensitivity (±10%) 500 mV/g
Frequency Response (±3dB) 6-480,000 CPM 0,1-8000 Hz
Frequency Response (±10%) 36-180,000 CPM 0,6-3000 Hz
Dynamic Range ± 10 g, peak
Temperature Measurement Range 37 to 250°F 3 to 121°C
Temperature Output 10 mV/°C
Electrical
Settling Time <2.5 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 1.7 µg/√Hz
Spectral Noise @ 100 Hz .2 µg/√Hz
Spectral Noise @ 1000 Hz .12 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.6 oz 160 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 3 Pin MIL-C-5015
Resonant Frequency 960,000 CPM 16000 Hz
Mounting Torque 2 to 5 ft. lbs 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart