TA131 Series

Dual Output High g Accelerometer, Temperature / Acceleration Top Exit Connector / Cable, 10 mV/g, 10 mV/°C
TA131-1D
3 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
C (+) Temperature Voltage
Stock Product
TA131-2D
CB105 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
Built To Order
TA131-3D
CB218 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
White (+) Temperature Voltage
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number TA131
Sensitivity (±10%) 10 mV/g
Frequency Response (±3dB) 60-900,000 CPM 1,0-15000 Hz
Frequency Response (±10%) 120-360,000 CPM 2,0-6000 Hz
Dynamic Range ± 500 g, peak
Temperature Measurement Range 37 to 250°F 3 to 121°C
Temperature Output 10 mV/°C
Electrical
Settling Time <2 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 300 µg/&radic:Hz
Spectral Noise @ 100 Hz 30 µg/&radic:Hz
Spectral Noise @ 1000 Hz 6 µg/&radic:Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 3.2 oz 90 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 3 Pin MIL-C-5015
Resonant Frequency 1,380,000 CPM 23000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Stud M6x1 Adapter Stud
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart