AC966 Series

IEC Certified (IECEx), Intrinsically Safe Accelerometer, Side Exit Connector / Cable, 100 mV/g Low Capacitance
AC966-1A
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
Stock Product
AC966-3C
CB206 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
AC966-9C
CB190 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number AC966 M/AC966
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-516,000 CPM 0,5-8600 Hz
Frequency Response (±10%) 60-300,000 CPM 1,0-6000 Hz
Dynamic Range ± 50 g, peak
Electrical
Settling Time <3 Seconds
Voltage Source (IEPE) 18-28 VDC
Constant Current Excitation 2-4 mA
Spectral Noise @ 10 Hz 6.5 µg/√Hz
Spectral Noise @ 100 Hz 2 µg/√Hz
Spectral Noise @ 1000 Hz 1.8 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 61 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.3 oz 150 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,320,000 CPM 22000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart