AC965 Series

Low Capacitance, IEC Certified (IECEx/ANZEx), Intrinsically Safe Accelerometer, Top Exit Connector/Cable, 100 mV/g
AC965-1A
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
Stock Product
AC965-3C
CB206 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
AC965-9C
CB190 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number AC965 M/AC965
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-900,000 CPM 0,5-15000 Hz
Frequency Response (±10%) 60-600,000 CPM 1,0-10000 Hz
Frequency Response (±5%) 600-300,000 CPM 10-5000 Hz
Dynamic Range ± 50 g, peak
Electrical
Settling Time <3 Seconds
Voltage Source (IEPE) 18-28 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 30 µg/√Hz
Spectral Noise @ 100 Hz 19 µg/√Hz
Spectral Noise @ 1000 Hz 15 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 3.2 oz 91 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,380,000 CPM 23000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Stud M6x1 Adapter Stud
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart