AC214 Series

Low & High Frequency Accelerometer, Top Exit Connector, 1000 mV/g
AC214-1D
2 Pin Connector
Connector Pin Polarity
A (+) Signla/Power
B (-) Common
Stock Product
AC214-2D
CB103 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
AC214-3D
CB206 Armored Integral Cabel
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number AC214 M/AC214
Sensitivity (±5%) 1000 mV/g
Frequency Response (±3dB) 6-600,000 CPM 0,1-10000 Hz
Frequency Response (±10%) 18-480,000 CPM 0,3-8000 Hz
Dynamic Range ± 7 g, peak
Electrical
Settling Time < 2 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 1.3 µg/√Hz
Spectral Noise @ 100 Hz 0.2 µg/√Hz
Spectral Noise @ 1000 Hz 0.1 µg/√Hz
Output Impedance < 100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation > 108 ohm
Specifications Standard Metric
Environmental
Temperature Range -58 to 250°F -50 to 121°C
Maximum Shock Protection 5000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 3.25 oz 92 g
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,020,000 CPM 17000 Hz
Mounting Torque 2 to 5 ft. lbs. 2.7 to 6.8 Nm
Mounting Hardware 1/4-28 Stud M6x1 Adapter Stud
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart