AC204 Series

Low & High Frequency Accelerometer, Side Exit Connector, 100 mV/g
AC204-1D
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
Stock Product
AC204-2D
CB103 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
AC204-3D
CB206 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number AC204 M/AC204
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 6-480,000 CPM 0,1-8000 Hz
Frequency Response (±10%) 36-180,000 CPM 0,6-3000 Hz
Dynamic Range ± 80 g, peak
Electrical
Settling Time < 2 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 1.3 µg/√Hz
Spectral Noise @ 100 Hz 0.2 µg/√Hz
Spectral Noise @ 1000 Hz 0.1 µg/√Hz
Output Impedance < 100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation > 108 ohm
Specifications Standard Metric
Environmental
Temperature Range -58 to 250°F -50 to 121°C
Maximum Shock Protection 5000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.7 ounces 162 grams
Case Material 316L Stainless Steel
Mounting Captive Bolt
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,020,000 CPM 17000 Hz
Mounting Torque 2 to 5 ft. lbs. 2.7 to 6.8 Nm
Mounting Hardware 1/4-28 Captive Bolt M6x1 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart