AC156 Series

Low Cost Low Frequency Accelerometer, Side Exit Connector/Cable, 500 mV/g
AC156-1D
2 Pin Connector
Connector Pin Polarity
A (+) Signal/Power
B (-) Common
Stock Product
AC156-2D
CB103 Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
AC156-3D
CB206 Armored Integral Cable
Conductor Polarity
Red (+) Signal/Power
Black (-) Common
Shield Cable Drain Wire
Built To Order
Specifications Standard Metric
Part Number AC156 M/AC156
Sensitivity (±20%) 500 mV/g
Frequency Response (±3dB) 6-600,000 CPM 0,1-10000 Hz
Frequency Response (±10%) 36-180,000 CPM 0,6-3000 Hz
Dynamic Range + 16g, peak
Electrical
Settling Time <2 Seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 1.7 µg/√Hz
Spectral Noise @ 100 Hz 0.2 µg/√Hz
Spectral Noise @ 1000 Hz 0.12 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -58 to 250°F -50 to 121°C
Maximum Shock Protection 5,000 g, peak
Electromagnetic Sensitivity CE
Sealing Welded, Hermetic
Submersible Depth 200 ft. 60 m
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 5.7 oz 162 grams
Case Material 316L Stainless Steel
Mounting 1/4-28
Connector (Non-Integral) 2 Pin MIL-C-5015
Resonant Frequency 1,080,000 CPM 18000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware 1/4-28 Stud M6x1 Adapter Stud
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart