TA184-M12A Series

Dual Output Temperature / Acceleration, M8 Captive Bolt, Side Exit M12 Connector / Cable, 100 mV/g, 10 mV/°C
TA184-M12A
4 Pin Connector
Connector Pin Polarity
1 (+) Signal/Power
2 (-) Common
3 Not Used
4 (+) Temperature Voltage
Stock Product
Specifications Standard Metric
Part Number TA184-M12A
Sensitivity (±10%) 100 mV/g
Frequency Response (±3dB) 30-600,000 CPM 0,5-10000 Hz
Frequency Response (±10%) 120-300,000 CPM 2,0-5000 Hz
Dynamic Range ± 80 g, peak
Temperature Measurement Range 37 to 250°F 3 to 121°C
Temperature Output 10 mV/°C
Electrical
Settling Time <2.5 seconds
Voltage Source (IEPE) 18-30 VDC
Constant Current Excitation 2-10 mA
Spectral Noise @ 10 Hz 8 µg/√Hz
Spectral Noise @ 100 Hz .82 µg/√Hz
Spectral Noise @ 1000 Hz .3 µg/√Hz
Output Impedance <100 ohm
Bias Output Voltage 10-14 VDC
Case Isolation >108 ohm
Specifications Standard Metric
Environmental
Temperature Range -40 to 250°F -40 to 121°C
Maximum Shock Protection 5,000 g, peak
Sealing Welded, Hermetic
Physical
Sensing Element PZT Ceramic
Sensing Structure Shear Mode
Weight 6.3 oz 180 grams
Case Material 316L Stainless Steel
Mounting M8x1.25
Connector (Non-Integral) 4 Pin M12
Resonant Frequency 1,200,000 CPM 21000 Hz
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Mounting Hardware M8 Captive Bolt
Calibration Certificate CA10

Typical Frequency Response

Frequency Response Chart